![]() ![]() NOTE: When WPA2 is selected, WPA2‑PSK is used by default for security key encryption.Īuto Launch AirMedia Landing Page: Turn on the toggle to automatically launch a web browser and redirect the user to the AirMedia landing page upon connection to the wireless access point. Security: Select an encryption key type to be used by the wireless network. NOTE: The wireless network name and security should each be 22 characters or fewer for optimal presentation on a display device and/or a connected touch screen. Security Key: Enter a security key to connect to the wireless network. Name/SSID: Enter a name for the wireless network. Wireless Access Point Mode: Turn on the toggle to enable the receiver to operate as a Wireless Access Point It is only available on Wi‑Fi network capable AirMedia receivers. NOTE: Wireless Access Point functionality is not available on the AM-3200. Wireless Access Point: The device can be used as a Wireless Access Point (WAP) so that users can present wirelessly without using a corporate Wi‑Fi network. This field is prefilled when the DHCP toggle is on. This field is prefilled when the DHCP toggle is on.ĭefault Gateway: Enter the gateway router address on the network. Subnet Mask: Enter the device subnet mask address on the network. IP Address: Enter the receiver IP address on the network. If the toggle is off, these settings must be entered manually. When enabled, the IP address, subnet mask, and default gateway settings are automatically filled. ![]() NOTE: Network Adapter 2 - AUX settings are unavailable on AM‑3100‑WF(‑I) models.ĭHCP: Turn on the toggle to use DHCP for the Ethernet connection. Network Adapter 1 - Main and Network Adapter 2 - AUX Secondary Static DNS: Enter the secondary DNS address. Primary Static DNS: Enter the primary DNS address. SSH: Turn on the toggle to enable Secure Shell protocol (SSH). NOTE: A host name and domain name can act as an alternative to IP addressing for connecting client computers to the device. This field is prefilled when the DHCP toggle is turned on. Host Name: Enter the receiver host name (22 characters or less).ĭomain: Enter the fully qualified domain name on the network (optional). Select Network to configure the receiver's network settings. Room Name: Enter the room name for the space that the receiver is installed in Language: Select the language that will be displayed on the receiver from the drop‑down list Select General Settings to configure general device settings. Select System Setup to modify general, network, power, cloud, update, date/time, and control system settings. If the menu is expanded, select the section name again to collapse the section. Select a section name to expand the menu. If a reboot is required after changes have been saved, select Yes to reboot the device or No to cancel the reboot. Select Save Changes to save changes to the configuration settings. Once any changes have been made to the receiver configuration, the Action button becomes a Save Changes button. Select Settings to configure various device settings.
0 Comments
Leave a Reply. |